Pillow packaging machine is controlled by single frequency converter, which can save time and membrane by setting less bags as required; human-machine interface operating system, setting parameters at ease, one key control, convenient, reduce labor and low production cost; the machine has its own interference diagnosis function; lower sensitivity photoelectric color mark tracking, accurate and safe starting position; all the control systems are controlled by the advanced software. Many people don't know a lot about the protection of pillow packing machine. Let's introduce the ordinary self-care.

1. The rolling bearing is the part with strict wear in the machine, so each rolling bearing should be injected with grease gun once every two months;

2. There is no same kind of greasy oil. There is no same kind of greasy oil. It is compared to the shaft sleeve on the packing film carrier roller. The shaft sleeve at the front sprocket of the feeding conveyor should reduce the injection of 40 × machine oil;

3. Gear engagement is also very important. Each gear should be dripped with 40 × machine oil;

4. The chain is seldom greasy. Each chain wheel should be dripped with a kinematic viscosity greater than 40 μ M;

5. Clutch is the crux of starting the packaging machine. Some clutches should reduce grease. Back sealing arc angle packaging machine, coffee packaging machine, tea inside